Filter
Top Products
12
3D Glasses
Parts and components
Power button
Power on: Press once.
Power off: Hold down the power button for
more than two seconds. (The LED indicator
light blinks three times and turns off.)
Auto power off: More than five minutes
without IR signals
LED indicator
The LED indicator light blinks or turns on
depending on the battery status.
Turns on in green:
The 3D glasses are operating.
Blinks once every two seconds:
The 3D glasses are running on battery
power.
Blinks three times every three seconds:
The battery level is low. Charge the
battery.
Turns on in yellow:
The battery is charging. (When the
battery is fully charged, the indicator
light turns off.)
While the 3D glasses are operating (the green
LED indicator light is on), the battery cannot be
charged.
IR sensor
Receives signals from the 3D sync
transmitter.
The sensitivity of the IR (Infrared Ray)
sensor varies according to a distance
between the 3D glasses and your
computer or usage environment.
Keep the IR sensor clean.
Connector for charge
Open the connector cover and connect
your computer to the connector for charge
with the supplied USB charging cable to
charge the battery.
Accessories
USB charging cable (4 feet/1.2 m)
Pouch