Filter
Top Products
18
Setting Functions/SCSI ID
Chapter 2 Getting Started
BW-RU101 Function Settings
Use function switches B to H on the rear panel of the unit to select the unit's
functions according to the host computer and software that you are using. Make
sure that the unit is off before setting the switches.
:Factory Settings
BW-RU101 Function switch settings
Note
• Reserved*
Do not set any of the reserved switches to 1, changing the reserved switches
setting may cause the unit failure.
Switch Function 1 0
A Reserved —
B Force CAV All operations are
performed in CAV
seek mode.
Optimum mode
enabled. (Automatic
CAV/CLV selection)
C Background format
control
Background Format
mode enabled
Background Format
mode disabled
D Reserved*
—
E Reserved*
F Inhibit Verify Do not verify writes Verify write operations
G Write Cache control Write caching disabled Write caching enabled
H Device Type Report 00H as device
type (Direct Access
device)
Report 07H as device
type (Optical Memory
device)
I Reserved*
—
J Reserved*
K Reserved*
L Reserved*
M Reserved*
N Reserved*
O Reserved*
P Reserved*
ABCDFFGH I JKLMNOP
I
O