Sony BZNP-100 Webcam User Manual


 
Note: If you change the application mode or video format, a message appears
after step 4, asking whether you would like to restart the software. Click [Yes].
Setting Up the Software
Before creating materials and playlists, there is some setup necessary: setup of
the software and registration related to the NSP-100.
Recommended Settings in the Setup Dialog Box
For the software, you have to open the Setup dialog box, then check and modify,
if necessary, the following setup items.
Apart from the procedure of creating the demonstration contents, we
recommend that you specify the following settings in the Setup dialog box:
Automatic Sending of Scheduled Playlists (All Groups) Section (for
Scheduling Application Only)
1 Click [Setup] on the main menu.
It specifies whether the system automatically sends playlists and the necessary
materials to the network players.
2 Select “Schedule” to use the Scheduling
Application.
When you do not want to allow automatic sending, select [No Send] in the Mode
drop-down list box. [Send (All Day)] allows the system to send newly created
playlists at any time, and [Send (Limited Time)] only allows the system to send
them during a specified time frame during the day. To allow automatic playlist
sending, specify the retry interval (hours:minutes) in the Interval text boxes, too.
For example, you would use “0:30” in the case of a 30-minute interval.
3 Select your video signal
format, NTSC or PAL.
When selecting [Send (Limited Time)], specify the time when the system sends
the playlist, too.
We recommend that you select [Send (Limited Time)], and specify a time such
that there is no conflict with the daily HDD sleep time (default: 3:00am).
Retry for Manual Sending Section
It specifies whether the system automatically re-sends materials and/or playlists
that were sent manually, in the event an error occurs.
We recommend that you select [Yes] as it allows the BZNP-100 software to
more efficiently manage automatic re-transfer of playlists and materials if a
transfer error occurs.
4 Click [OK].
5