Filter
Top Products
3
EN
Table of Contents
Introduction ..............................................................................3
Precautions ...............................................................................3
Getting Started .........................................................................4
Using Your Monitor ................................................................5
Adjustments..............................................................................6
Entering New Timings..........................................................10
Power Saving Function......................................................... 10
Plug and Play ......................................................................... 10
Use of the Tilt-Swivel............................................................ 10
Damper Wire .......................................................................... 10
Specifications.......................................................................... 11
Troubleshooting..................................................................... 11
Introduction
Congratulations on your purchase of a Sony Multiscan SF
series monitor!
This monitor incorporates over 25 years of Sony experience
with Trinitron display technology, ensuring excellent
performance and outstanding reliability.
The advanced design of the SF series together with Digital
Multiscan Technology allows it to sync to any video mode
within its wide scan range. In addition, its three factory
preset color modes and one user adjustable color mode give
you unprecedented flexibility in matching on-screen colors
to hard copy print outs. Furthermore, this monitor features
digital controls with OSD (On Screen Display). It delivers
easier adjustment by visualizing your control statement. All
together, it delivers incredible performance with the quality
and support you can expect from Sony.
Precautions
Installation
•Prevent internal heat build-up by allowing adequate air
circulation. Do not place the unit on surfaces (rugs,
blankets, etc.) nor near materials (curtains, draperies) that
may block the ventilation holes.
•Do not install the unit near heat sources such as radiators
or air ducts, nor in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
•Do not place the unit near equipment which generates
magnetism, such as a converter or high voltage power
lines.
Maintenance
•Clean the cabinet, panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, alkaline cleaner, scouring
powder or solvent, such as alcohol or benzine.
•Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, like a ball point pen or a screw
driver. Otherwise, this type of contact may result in a
scratched picture tube.
Warning on Power Connection
•Use a proper power cord for your local power supply.
For the customers in U.S.A.
If you do not do this, this monitor will not conform to
mandatory FCC standards.
Examples of plug shape:
•Before disconnecting the power cord, wait for at least 30
seconds after turning off the power switch to allow for the
discharging of static electricity on the CRT display surface.
•After the power has been turned on, the CRT is
demagnetized for approximately 5 seconds. This generates
a strong magnetic field around the bezel, which may affect
the data stored on magnetic tapes or disks near the bezel.
Place such magnetic recording equipment and tapes/disks
apart from this unit.
The socket-outlet should be installed near the equipment
and be easily accessible.
for 100 to 120 V AC for 220 to 240 V AC