E:\VPL-CX76\2634401121\2634401121VPLCX8676WW\05C04.fm
masterpage: Left
22
Operating the Picture File
VPL-CX86/CX76
2-634-401-12 (1)
After selecting the file you want to protect,
set “Protect” to “On” or “All On”. When a
file is protected, the protect mark is
displayed.
After selecting the file you want to rotate, set
“Rotate”. The picture rotates 90° on every
pressing of the ENTER key.
A protected file cannot be rotated.
You can register a picture file in the
“Memory Stick” as the startup picture file
which is displayed when the power is turned
on.
Set “Startup” to “Entry”. When the file is
registered, the startup mark is displayed.
When you want to use the registered picture
file as the startup file, set “Startup” of the
Setting screen to “Custom” (see page 26).
To cancel the registration of the
startup picture
1 Display the picture setting menu by
selecting a thumbnail, select
“Startup,” and press the ENTER key.
2 Press the m or M key to select
“Cancel,” and press the ENTER key.
As the setting of “Custom” is memorized in the
“Memory Stick”, when you want to use the
registered picture file as the startup file, insert
the
“Memory Stick” in the projector before
turning on the projector.
You can delete the selected picture file or all
picture files of the selected contents.
1 Select “Delete”, then press the
ENTER key.
2 Select an item. When “Selected file
deleted. OK?” or “All files deleted.
OK?” is displayed, select “Yes”, then
press the ENTER key.
All Img. : to delete all picture files of the
selected contents
Sel. Img. : to delete the selected picture
file
Close : when you do not want to delete
the file
A protected file cannot be deleted.
Select a picture file, select “Information” in
“Menu” on the index screen of the full-
screen still picture or on the Movie Player,
then press the ENTER key. When you want
to display the picture file information, select
“On”. The information is displayed at the
bottom of the screen. If you do not want to
display the information, select “Off”.
When the Presentation Viewer is displayed,
the number and size (resolution) of the
picture file are displayed. When the Picture
Viewer is displayed, the number, size
(resolution), file format and recorded date of
the picture file are displayed.
For a picture file processed on a computer, the
renewal date may be displayed instead of the
recorded date.
1 Select a movie file, then press the
ENTER key.
2 Select “Movie Player,” then press the
ENTER key.
Protecting an Important File
Rotating a Picture File
Note
Registering a File as the
Startup Picture
Note
Deleting a Picture File
Note
Showing/Hiding the Picture
File Information
Note
Switching the Sound of a
Movie File
