Filter
Top Products
9
Introduction
A Busy indicator
Indicates the drive status.
Lit (green) :
The power is on.
Lit (orange):
The drive is reading data,
playing a music CD, or
writing data (packet writing).
Blinking (orange):
The drive is writing data
(disc-at-once or track-at-
once).
Off: The power is off.
B Eject button
Press to open and close the disc tray.
C Disk tray
Insert discs here, label side up.
Hint
When you insert a disc into the drive, make
sure that it is under the four pins. When using
the drive vertically, make sure that you set the
disc inside the two lower pins.
D Power Switch
Press to turn the drive on or off.
(With some models, the power switch is
located on the front panel.)
E USB Connector
Used with a USB cable to connect the
drive to a computer or another USB
device.
F i.LINK S400 Connector (6-pin)
Used with an i.LINK cable to connect
the drive to a computer or another
i.LINK device.
G i.LINK S400 Connector (4-pin)
Used with an i.LINK cable to connect
the drive to a computer or another
i.LINK device.
H DC IN Jack
Connect the supplied AC power cord to
the AC power adapter. Connect this
assembly to the DC IN jack, and then
connect the whole to the AC outlet.