Sony HDS-V3232 Network Router User Manual


 
5-32
ROUTING SWITCHER SYSTEM (E)
5-2. Setting Items of the Secondary Station
N: SET PANEL TABLE (BKS-R3206/R3216)
Purpose
This menu is used to assign source name and destination
name to be displayed.
Setting Procedure
The setting procedure is the same as that of menu item [N :
SET PANEL TABLE] (BKS-R3204).
m
1. The setting of [SET PANEL TABLE (SOURCE)]
assigns the source name and [SELECT DESTINA-
TION] assigns the destination name.
2. The destination name can also be assigned using the
button on the front panel. Refer to the Operation
Manual for setting.
3. If “Type + number” name mode is selected in the
menu item [Z : SET PANEL STATUS], (refer to the
Operation Manual of BKS-R3206) “SET PANEL
TABLE (SOURCE)” is not displayed.
Example of Setting Screen
SONY ROUTING SYSTEM SETUP MENU BKS-R3206 V3.10 STATION NUMBER 18
SET PANEL TABLE( SOURCE )
01 KEY=IN001 02 KEY=IN002 03 KEY=IN003 04 KEY=IN004
05 KEY=IN005 06 KEY=IN006 07 KEY=SONY007 08 KEY=SONY008
09 KEY=SONY009 10 KEY=SONY010 11 KEY=IN011 12 KEY=IN012
13 KEY=SONY013 14 KEY=SONY014 15 KEY=SONY015 16 KEY=IN016
SELECT DESTINATION
01 OUT001 02 OUT002 03 OUT003 04 OUT004
05 OUT005 06 OUT006 07 OUT007 08 OUT008
09 OUT009 10 OUT010 11 OUT011 12 OUT012
13 OUT013 14 OUT014 15 OUT015 16 OUT016
0=IN 1=OUT 2=SONY 3=VTR 4=SUP 5=CB 6=AIR 7=ME
8=PGM 9=CL A=SL B=L C=RET D=MIX E=JEEP F=OSC
G=L/A H=REM I=CAM J=STDO K=AUX L=COV M=BS N=CS
O=SAT P=CG Q=WETH R=TEST S=HD T=D1- U=D2- V=SEG
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME
4. When “T : TAKE M : MONI” is displayed on the
screen, it means that the button on the source side can
be set as the TAKE button or MONI button.
Before pressing [Enter], select a key from the source
side. To set it as the TAKE button, press [T]; to set it
as the MONITOR button, press [M].
5. When “V : VTR” is displayed on the screen, it means
that the VTR control function can be assigned to the
buttons on the source side.
Before pressing [Enter], select a key from the source
side and press [V].
Enter the number according to the list of operations on
the bottom of the screen.
6. When “E : LEVEL” is displayed on the screen, it
means that the level control function can be assigned
to the buttons on the source side.
Before pressing [Enter], select a key from the source
side and press [E].
Enter the number according to the list of levels on the
bottom of the screen.
n
In BKS-R1607 of version V1.10 and higher, any desired
button among the sixteen buttons can be set as a TAKE
button.
When this setting is performed, the name selected by the
SELECTOR knob on the front panel can be taken by
pressing the TAKE button.
(Maximum inputs 512 x outputs 512)
The actual setting procedure is as follows. Select a key
from the source side which you want to use as the TAKE
button. Press the [T] button.
Example of Setting Screen
SONY ROUTING SYSTEM SETUP MENU BKS-R1607 V1.10 STATION NUMBER 12
SET PANEL TABLE(SOURCE) CONTROL DESTINATION = OUT244
01 KEY=SRC004 02 KEY=SRC005 03 KEY=SRC006 04 KEY=SRC001
05 KEY=SRC002 06 KEY=SRC003 07 KEY=SRC007 08 KEY=SRC008
09 KEY=SRC009 10 KEY=SRC010 11 KEY=SRC013 12 KEY=SRC014
13 KEY=....... 14 KEY=....... 15 KEY=....... 16 KEY=TAKE
SET PANEL TABLE(DESTINATION)
01 KEY=....... 02 KEY=....... 03 KEY=....... 04 KEY=.......
05 KEY=....... 06 KEY=....... 07 KEY=....... 08 KEY=.......
09 KEY=....... 10 KEY=....... 11 KEY=....... 12 KEY=.......
13 KEY=OUT001 14 KEY=OUT012 15 KEY=OUT003 16 KEY=.......
0=SRC 1=OUT 2=2 3=3 4=4 5=5 6=6 7=7
8=8 9=9 A=A B=B C=C D=D E=E F=F
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME T:TAKE