Sony HDS-V3232 Network Router User Manual


 
4-25
ROUTING SWITCHER SYSTEM (E)
4-6. Setting Up BKPF-300/301/350/351
4-6. Setting Up BKPF-300/301/350/351
1. Set the switch S1-3 on BKPF-300/301/350/351 to “OFF (TERMINAL)” position.
2. Select the menu item [R: CALL SECONDARY STATION] from the menu screen of primary station,
and call BKPF-300/301/350/351.
The following screen appears.
(Example of BKPF-300)
1 SOURCE LOCATION of equipment. Input range is set here.
2 DESTINATION LOCATION of equipment. Output range is set here.
3 LEVEL of equipment is set here.
4 The MATRIX switching timing is set here. (Select either ASYNC or FIELD.)
5 The SDI format is set here. (Available in BKPF-300 only.)
(Select a type from three formats of 4: 2: 2, 4fsc NTSC or 4fsc PAL.)
3. Set the above described items from 1 to 5.
(1) Set the items from 1 to 3 as follows. Select an area to modify using the cursor key. Enter any
desired value using the numeric keys on the control terminal.
(2) Set the items 4 and 5 as follows. Select an area to modify using the cursor key, and press
[Enter].
Every pressing of [Enter] increments the preset values in order.
4. Press [Ctrl] _ [D] to return to the menu screen of primary station from the setting screen.
SONY ROUTING SYSTEM SETUP MENU BKPF-300 VX.XX STATION NUMBER XXX
SOURCE No: 0001 - 0008 DESTINASTION No: 0001 LEVEL No: 1
SWITCHING FIELD: ASYNC SDI FORMAT: 4:2:2
Ctrl-D : RETURN Ctrl-E : RETURN TO MENU
1
4
3
2
5
Model name
Software version indication
Station address value