Sony ICD-B10 Microcassette Recorder User Manual


 
38
GB
Troubleshooting
Before taking the unit for repair, check the following sections. Should any
problem persist after you have made these checks, consult your nearest
Sony dealer.
Symptom
The unit does not
operate.
No sound comes
from the speaker.
FULL is displayed
and you cannot start
recording.
You cannot
overwrite.
Noise is heard.
Remedy
The batteries have been inserted with incorrect
polarity.
The batteries are weak.
The buttons are locked with the HOLD switch.
(If you press any button, HOLD will flash
three times.)
The earphone or headphones are plugged in.
The volume is turned down completely.
The memory is full. Erase some of the
messages. See page 19.
99 messages have been recorded in the selected
file. Select another file or erase some of the
messages. See page 19.
The remaining memory is too short. The
overwritten part will be deleted after the
overwriting part finishes recording. Therefore,
you can only overwrite within the remaining
recording time.
An object, such as your finger, etc., accidentally
rubbed or scratched the unit during recording
so that noise was recorded.
The unit was placed near an AC power source,
a fluorescent lamp or a mobile phone during
recording or playback.
Plug of the connected microphone was dirty
when recording. Clean the plug.
Earphone/headphones plug is dirty. Clean the
plug.