Filter
Top Products
Adjustment Using the Menus
29
For finer according to the input signal, see “DOT
PHASE” on page 24.
When the menu screen is displayed, the APA does not
function.
Note
If the APA operation does not finish correctly depending
on the input signal, adjust DOT PHASE (page 24).
CLOSED CAPTION SETTING
AUDIO SETTING
REMOTE menu
Submenu Setting
CLOSED
CAPTION
ENABLE
Select ON to display the closed caption
and OFF not to display.
Note
When you display the closed caption, set
FORMAT DISPLAY (page 25) to OFF
or AUTO.
CAPTION VISION Sets the closed caption.
You can select from among OFF, CC1,
CC2, CC3, CC4, TEXT1 and TEXT2.
CLOSED CAPTION ENABLE: xxx
CAPTION VISION: xxx
USER CONFIGtCLOSED CAPTION SETTING
INPUT SELECT: xxx
OPTION AUDIO SETTING
OPTION A AUDIO CH:
x
OPTION B AUDIO CH:
x
USER CONFIGtAUDIO SETTING
Submenu Setting
INPUT SELECT Selects the input audio signal.
• ALL: The sound except from
BKM-220D and BKM-243HS is
output.
• COMPOSITE: When the
COMPOSITE button is pressed,
the sound is output.
• Y/C: When the Y/C button is
pressed, the sound is output.
• RGB: When the RGB button is
pressed, the sound is output.
• COMPONENT: When the
COMPONENT button is
pressed, the sound is output.
• HD15: When the HD15 button
is pressed, the sound is output.
• DVI: When the DVI button is
pressed, the sound is output.
OPTION AUDIO
SETTING
When BKM-220D/243HS is
installed, set the audio channel for
each adaptor.
CH1, CH2, CH1+CH2, CH3, CH4,
CH3+CH4, CH5, CH6, CH5+CH6,
CH7, CH8, CH7+CH8, CH9,
CH10, CH9+CH10, CH11, CH12,
CH11+CH12, CH13, CH14,
CH13+CH14, CH15, CH16,
CH15+CH16, OFF
You can display the L/R audio
levels of the selected channels on
the display when the multi display
is enabled.
PARALLEL REMOTE:
SERIAL REMOTE: xxxxxxx
MONITOR:
CONTROLLER:
CONNECTION: xxx
REMOTE