Filter
Top Products
Specifications
32
Specifications
Picture performance
LCD panel a-Si TFT Active Matrix
Pixel efficiency 99.99 %
Viewing angle (up/down/left/right, contrast > 10 : 1)
89°/89°/89°/89° (typical)
Scan Normal 0 %
Over scan 5 %
Efficient picture size
LMD-2050W: 433.4 × 270.9, 511.1
mm (w/h, dia)
(17
1
/8 × 10
3
/4, 20
1
/8 inches)
LMD-2450W: 518.4 × 324.0, 613.2
mm (w/h, dia)
(20
1
/2 × 12
7
/8, 24 inches)
Resolution LMD-2050W: H 1,680 dots,
V 1,050 lines
LMD-2450W: H 1,920 dots,
V 1,200 lines
Aspect ratio 16 : 10
Input
Composite input (NTSC/PAL) connector
BNC type (1)
1 Vp-p ± 3 dB sync negative
Y/C input connector
4-pin mini-DIN (1)
Y: 1 Vp-p ± 3 dB sync negative
C: 0.286 Vp-p ± 3 dB (NTSC burst
signal level)
0.3 Vp-p ± 3 dB (PAL burst signal
level)
RGB/component input connectors
BNC type (3)
RGB input: 0.7 Vp-p ± 3 dB (Sync On
Green, 0.3 Vp-p sync negative)
Component input: 0.7 Vp-p ± 3 dB (75
% chrominance standard color bar
signal)
Audio input connectors
Phono jack (2)
–5 dBu
47 kilohms or higher
External synchronized input connector
BNC type (1)
0.3 to 4.0 V p-p ± bipolarity ternary or
negative polarity binary
HD15 input connector
D-sub 15-pin (1)
R/G/B: 0.7 Vp-p, sync positive (Sync
On Green, 0.3 Vp-p sync negative)
Sync: TTL level (polarity free, H/V
separate sync)
Plug & Play function: corresponds to
DDC2B
DVI input connector
DVI-D (1)
TMDS signal link
Remote input connector
Parallel remote
Modular connector 8-pin (1)
Serial remote
D-sub 9-pin (RS-232C) (1)
RJ-45 modular connector
(ETHERNET) (1)
Optional input slot
2 slots
Signal format:
H: 15 to 45 kHz
V: 48 to 60 Hz
DC IN connector DC24V (output impedance 0.05 Ω
or less)
Output
Composite output connector
BNC type (1)
Loop-through, with 75 ohms automatic
terminal function
Y/C output connector
4-pin mini-DIN (1)
Loop-through, with 75 ohms automatic
terminal function
RGB/component connectors
BNC type (3)
Loop-through, with 75 ohms automatic
terminal function
External synchronized output connector
BNC type (1)
Loop-through, with 75 ohms automatic
terminal function
Audio monitor output connectors
Phono jack (2)
Built-in speaker output
1.0 W+1.0 W (stereo)
General
Power LMD-2050W: AC 100 to 240 V, 50/60
Hz, 0.8 A - 0.4 A
DC 24V, 3.3 A
LMD-2450W: AC 100 to 240 V, 50/60
Hz, 1.1 A - 0.6 A
DC 24V, 4.6 A
Power consumption
LMD-2050W: Maximum: approx. 95
W (when two BKM-229X are
installed)
LMD-2450W: Maximum: approx. 115
W (when two BKM-229X are
installed)
Peak inrush current
LMD-2050W: