Filter
Top Products
Applicable Models
PFV-D10 Digital Video Interface Unit
PFV-D300 Digital Video Interface Unit
PFV-D50A Digital Video Interface Unit
Specifications
Inputs/outputs
Audio signal inputs:
AES/EBU IN connectors (BNC type) (8)
Audio signal outputs:
AES/EBU OUT connectors (BNC type)
(2)
Rise and fall time:
37 ns
DC offset:
Less than ؎50 mV
ISR output information
Status messages:
3 items
Setup messages:
1 item
General
Power requirements:
+5 V DC, 0.5 A, -5 V DC, 1.0 A
(supplied from the PFV-D/PFV-HD
Series Interface Unit)
Power consumption:
Approx. 6 W
Operating temperature:
5 to 40 °C (41 to 104 °F)
Dimensions (H x W)
Board:
195 x 310 mm
(7 3/4 x 12 1/4 inches)
Connector panel:
195 x 25 mm
(7 3/4 x 1 inches)
Mass
Board:
Approx. 550 g (1 lb 3 oz)
Connector panel:
Approx. 200 g (7 oz)
1
2
AES/EBU DIGITAL
AUDIO INPUT
AES/EBU DIGITAL
AUDIO OUTPUT
The BKPF-350 digital audio selector board is an eight
input to two output switching matrix for AES/EBU audio
signals. Crosspoint information is memorized for 24
hours. Up to 14 BKPF-350 boards can be integrated to
form a 112 input, 2 output switching matrix. Input and
outputs are via BNC connectors.
Features
* Eight input, two output, switching matrix * Simultaneous
control of multiple signals with matrix level setting *
Control from BKS-R Series control units via S-BUS
network * Supports ISR
The BKPF Series function boards install in both the PFV-D and the PFV-HD
Series Interface Units. In a PFV-HD Series Interface Units, they can be
installed together with the HKPF Series function boards.
BKPF-350 Digital Audio Selector Board
Rear Panel
130
Interface Processor D Series
Interface Processor D Series
*SGC_0117-0132 02.3.16 5:06 PM Page 130