Filter
Top Products
Applicable Models
PFV-SP3100 Signal Processing Unit
PFV-SP3300 Signal Processing Unit
Supplied Accessories
Operation manual (1)
Installtion manual (1)
Slot number label (1)
The HKSP-525 down converter board converts an HD
SDI signal to an SD SDI signal. It accepts an HD SDI
input with embedded audio, and provides three SD SDI
outputs (525/625) with embedded audio, plus an analog
monitor output.
Features
*Down converts an HD SDI signal to an SD SDI (D1)
signal; From 1035(1125) / 59.94i, 29.97PsF to 480(525) /
59.94i, 29.97PsF, From 1080(1125) / 59.94i, 29.97PsF to
480(525), / 59.94i, 29.97PsF, From 1080(1125) / 50i,
25PsF to 576(625) / 50i, 25PsF *Provides an analog
composite monitor output *Handles eight embedded
audio channels *Retains ancillary data (VITC) and UMID
that are on an HD SDI input to an SD SDI output *Output
signal aspect ratio modes selectable from Squeeze, Edge
Crop, Letter Box (16:9) and Semi Letter Box (13:9. 14:9,
15:9) *Minimum delay/frame delay selectable *Remotely
controllable from an optional HKDV-503/900 digital video
controller via a RS-422 (GPI also provided) or UCP-8060
universal control panel (Ethernet 100BASE-TX) *Auto
colorimetry selection between 1035 and 1080 active lines
The HKPF-SP/HKSP function boards install in PFV-SP Series Signal
Processing Units in any combination with other HKPF-SP/HKSP function
boards.
HD IN
525
SD OUT
MONITOR
REMOTE
1
2
3
I
N
P
U
T
O
U
T
P
U
T
HD DWN
STATUS
SDI IN
REF IN
AUDIO IN
ASPECT
HKSP-525
REMOTE
LOCAL
SQ
LD
EC
55
Interface Processor SP Series
Interface Processor SP Series
HKSP-525 Down Converter Board
(Tentative)
Front Panel
(Tentative)
Rear Panel
Now
Printing
*SGC_0043-0068 02.3.16 5:02 PM Page 55