Filter
Top Products
Applicable Models
BVS-A3232 Analog Audio Routing Switcher
BVS-V3232 Analog Video Routing Switcher
DVS-128 Routing Switcher
DVS-RS1616 RS-422A Remote Routing
Switcher
DVS-TC3232 Time Code Routing Switcher
HDS-X3400 Multi Bit-Rate Routing Switchers
HDS-X3600 Multi Bit-Rate Routing Switchers
HDS-X3700 Multi Bit-Rate Routing Switchers
HDS-X5800 Multi Bit-Rate Routing Switcher
Supplied Accessories
Operation and maintenance manual (1)
BNC T-bridge connector (1)
Specifications
Control signal
REMOTE 1:
S-BUS (BNC type) (1)
Data transfer method: BI-PHASE SPACE
Data transfer rate: 312.5 kb/s
Max. cable length 500 m (when using
Belden 8281, Fujikura 5C2V or
equivalent 75 Ω coaxial cable).
Expandable to 1000 m with a
BKPF-L803 S-BUS Isolator/Expander
REMOTE 2:
D-sub 9-pin (1)
Data transfer method: Conforms to the
EIA RS-422A Cart+
Data transfer rate: 38.4 kb/s
RS-232C:
D-sub 9-pin male (1)
Data transfer method: 8-bit, no parity, 1
stop bit
Data transfer rate: 19.2 kb/s
GPI I/O:
D-sub 25-pin male (1), D-sub 25-pin
female (1)
General
Power requirements:
100 to 240 V AC, 50/60 Hz
Current consumption:
0.25 A
Operating temperature:
0 to 45 °C (32 to 113 °F)
Dimensions (W x H x D):
440 x 44 x 120 mm
(17 3/8 x 1 3/4 x 4 3/4 inches)
Mass:
Approx. 1.5 kg (3 lb 5 oz)
The BKS-R3240A X-Y control unit controls matrix cross
points in routers connected to an S-BUS system. Any
combination of inputs and outputs, pre-defined with the
control terminal, are controllable with a single ‘take’
button. The names of the selected sources and
destinations are shown on the front panel displays. The
shallow depth of the unit makes it easy to accommodate
the BKS-R3240A in front of a desk-mounted switcher
control panel.
Features
* Router control in S-BUS systems * Fully compliant with
expanded S-BUS systems * Compact 1U, 19-inch rack
mounting design * Four display modes — Type plus
Number display, Description Name display, 4-digit display,
and Level display * Three source/destination selection
systems available * BPS (D) Selection (Button-Per-Source
or Destination) * Type plus Number Selection * Key Pad
Entry (Telephone-style keypad for alpha/numeric entry of
sources/destinations by name) * Eight GPI I/O terminals
standard * Alternate source switching using Chop function
* Sources selectable to levels * Large selector buttons
show source and destination name (Status shown by
button color) * Several crosspoints switchable with a
single button (Phantom function) * Route function for
expanded sources * Number of sources and destinations
controlled expandable with additional units * Control
bridge between RS-422A (cart+ protocol) and S-BUS *
Easy ROM update * Single cable connection * Reduced
depth helps in desk mounting applications
BKS-R3240A X-Y Control Unit
Rear Panel
28
Routing Switchers
Routing Switchers
*SGC_0011-0038 02.3.16 5:00 PM Page 28