Sony PCG-9332 Laptop User Manual


 
Troubleshooting
109
Troubleshooting audio
My speakers have no sound
If the built-in speakers are turned off, press Fn+F3 to turn on the speakers.
You can also turn on the speakers using the Jog Dial control.
If the speaker volume is turned to the minimum, press Fn+F4, and then press
or
to increase the volume or you can use the Jog Dial control to control
the volume.
If nothing is displayed when you press Fn+F3 or Fn+F4.
1 Double click System in Control Panel.
2 Set the sound device to enable in Device Manager.
If your notebook is powered by batteries, check that the battery packs are
inserted properly and that they are charged.
If you are using an application that has its own volume control, check that
the volume is turned up.
Check the volume controls in Windows.®
If you connect external speakers, check that the speakers are properly
connected and the volume is turned up. If the speakers have a mute button,
make sure it is off. If the speakers are powered by batteries, check that the
batteries are inserted properly and that they are charged.
If you have connected an audio cable to the Headphone connector,
disconnect the cable.
My microphone does not work
If you are using an external microphone, check that the microphone is plugged
into the Microphone connector. See “Connecting an External Microphone” on
page 76 for details.
Troubleshooting the printer
I cannot print
The default setting for the printer port mode is correct for most printers. If
you cannot print, try changing the printer port mode. In Sony Notebook
Setup, select the Printer tab. If the printer port mode is set to ECP, change it
to bi-directional. If the printer port mode is set to bi-directional, change it to
ECP. See “Displaying the Sony Notebook Setup Screen” in the