Filter
Top Products
Sony Notebook User Guide
Using your notebook
35
nN
Using PC Cards
Your computer includes a PC Card slot. PC Cards allow you to connect portable external devices.
Inserting a PC Card
To insert a PC Card, proceed as follows:
1 Insert the PC Card into the PC Card slot, front label facing up (1).
2 Gently push the card into the slot until the card is fixed into the connector.
✍ Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony Notebook Setup to disable devices.
Be sure to use the most recent software driver provided by the PC Card manufacturer.
If an “!” mark appears on the Device Manager tab in the System Properties dialog, remove the software driver and then reinstall it.
You do not need to shut down the computer before inserting or removing a PC Card.
Do not force a card into the slot. It may damage the connector pins. If you have difficulty inserting a card, check that you are inserting the card in the
correct direction. See the manual supplied with your PC Card for more information on use.
For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate power management modes while the card is
inserted, you may find that a device connected to your system is not recognized. Reboot your system to correct the problem.
Do not put your notebook in a bag or a case with a PC Card inserted in the slot. Pressure or shock to the PC Card may damage your notebook.