Filter
Top Products
Sony Notebook User Guide
Getting help
87
nN
I cannot play a DVD-ROM
❑ If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you
are trying to play is incompatible with the DVD-ROM drive on your notebook. The region code is listed
on the packaging of the disc.
❑ If you hear sound but cannot see a picture, your computer's video resolution may be set too high. For
best results, change the resolution in the Windows
®
Control Panel - Display - Settings to 800 x 600
using 8-bit colour.
❑ If you see a picture but cannot hear any sound, check all of the following:
❑ Make sure the mute setting is off on your DVD player.
❑ Check the master volume setting of the Volume Control. If you have connected speakers externally,
check the volume settings of your computer speakers and check the connections between your
speakers and the computer.
❑ In the Device Manager, check that the correct drivers are installed properly. To display the Device
Manager, click Start, and select Control Panel. Double-click the System icon. On the Hardware
tab, click the Device Manager button.
❑ A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary,
reboot the computer, remove the disc and then check that it is not dirty or damaged.
❑ Check your PG (Parental Guidance) in the DVD software as this might be preventing you from playing
certain DVDs when it is activated.
✍ On your computer, the default DVD region code is 2. Do not change this setting using the Region Code Change function in Windows
®
, or using any
other software applications. System malfunctions originating from the user changing the DVD region code, are beyond the scope of your warranty
and will result in service charges for repair.
Why does my CD-RW drive not record at the highest speed?
You must use 8x CD-R or 4x CD-RW media or higher to achieve optimum performance.