Filter
Top Products
Configuring Your System
19
VGA Enable Jumper
You can enable or disable the onboard VGA controller if you install a
VGA PCI add-in card.
To change the VGA enable jumper, perform the following steps:
1 Remove the system cover (see “Removing the System Cover” on
page 22).
2 Set the jumper to enable or disable (see “VGA Enable (VGAEN)” on
page 63).
3 Reinstall the system cover (see “Replacing the System Cover” on
page 23).
KY0092.VS
D
VGA Enable
123
VGA Disable