Filter
Top Products
27 (EN)
Restoring the Original Picture
Size and Position
1 In the PIC SIZE menu, press >/. to move the
cursor (z) to “RESET” and press ENT.
The following menu appears on the monitor
screen.
2 Press >/..
“NO” changes to “YES.”
3 Press ENT.
The original picture size and position are restored.
To cancel the reset function, press the MENU button
before pressing the ENT button.
4 Press >/. to move the cursor (z) to “V SHIFT”
and press ENT.
The following menu appears on the monitor
screen.
5 Press >/. to shift the picture.
>: to shift the picture upward
.: to shift the picture downward
The vertical picture position is indicated on the
monitor screen from MIN(–50) to MAX(+50). The
factory value is 00.
6 Press ENT.
The menu returns to the PIC SIZE menu.
Zooming Up the Picture
You can also operate with the ZOOM button on the
Remote Commander.
1 In the PIC SIZE menu, press >/. to move the
cursor (z) to “ZOOM” and press ENT.
The following menu appears on the monitor
screen.
2 Press >/. to set zoom.
Each time you press >, the picture is magnified by
two, three, and four times respectively.
To zoom down, press ..
3 Press ENT.
The menu returns to the PIC SIZE menu.
VSHIFT : 00
RESET: NO
SELECT CANCEL
ENTER
MENU
RESET: YES
SELECT CANCEL
ENTER
MENU
ZOOM : x1