Filter
Top Products
7 (GB)
Setup
Before using your monitor, check that the following items are
included in your carton:
•LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
•Cord strap
• CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
• Warranty card
• Quick Setup Guide
Step 1:Use the stand
x Using the supplied stand
Open the stand.
Note
The stand is folded at the factory. Be sure not to place the display
vertically with the stand as it is. Otherwise, the display may topple over.
x Using the VESA compatible stand
When using a non-supplied VESA compatible mounting arm or
stand, use the VESA compatible screws to attach.
You can use the display with or without the supplied stand.
Step 2: Connect the display to your
computer
Turn off the monitor and computer before connecting.
Notes
• Do not touch the pins of the video signal cable connector as this might
bend the pins.
• Check the alignment of the HD15 and DVI-D connector to prevent
bending the pins of the video signal cable connector.
x Connect a computer equipped with a DVI
output connector (digital RGB)
Using the supplied DVI-D video signal cable (digital RGB),
connect the computer to the monitor’s DVI-D input connector
(digital RGB)
x Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog
RGB), connect the computer to the monitor’s HD15 input
connector (analog RGB).
screw positions of
the supplied stand
Bottom-side view
screw positions of VESA
compatible stand
75mm : SDM-G76D/
SDM-G96D
100mm : SDM-G206W
to the computer’s DVI
output connector
(digital RGB)
to the DVI-D input
connector
(digital RGB)
DVI-D video signal cable
(digital RGB) (supplied)
to the HD15 input
connector
(analog RGB)
to the computer’s HD15
output connector
(analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)