Filter
Top Products
11
US
1 Grasp the lower middle part of the LCD panel while
holding the display stand, then, tilt the LCD panel
adequately backward.
2 Grasp the lower sides of the LCD panel, then adjust
screen tilt.
3 Grasp the lower sides of the LCD panel, then adjust
screen height.
Selecting the input signal
(INPUT button)
Press the INPUT button.
The input signal change each time you press this button as
follows.
Selecting the input signal for the audio input jack
See “ (AUDIO SELECT)” on page 16.
On-screen
message
(Appears about
5 seconds on
the upper left
corner.)
Input indicator
lights up
Input signal
configuration
INPUT1: DVI-D INPUT1 DVI-D input
connector (digital
RGB) for INPUT1
INPUT1: HD15
(SDM-X72/X82
only)
INPUT1 HD15 input
connector (analog
RGB) for INPUT1
INPUT2: HD15 INPUT2 HD15 input
connector (analog
RGB) for INPUT2