Filter
Top Products
12
GB
3 Close the paper tray cover.
Note
If the print paper is not loaded
properly, the paper tray cover cannot
be closed. Make sure that the paper
tray cover is completely closed.
4 Pull out the protective sheet.
5 Pull the paper tray door open,
and insert the paper tray into
the unit.
Push the paper tray all the way in,
until it audibly snaps into place.
When printing is completed
Remove the paper tray from the unit
and close the paper tray door.
Notes
• The printing pack contains a print cartridge
for 24 prints and 2 × 12-pack print paper.
Only load half of the print paper at one
time.
• When adding print paper to the paper tray,
take care not to exceed the maximum of 12
sheets. Do not mix different types of print
papers. Otherwise a paper jam can occur.
• Do not write or print anything on the print
paper before inserting it into this unit.
After printing, if you wish to write onto the
image side of the paper, use an oil-based
marker. You cannot further print on the
image side of the paper.
• Do not attach any labels, stamps, stickers
or similar to the print paper before
printing.
• When handling the print paper before
printing, do not touch the image side (the
side where nothing is printed). If there are
fingerprints or dust on the print paper or
the ribbon, print quality may be degraded.
• Be sure to use only the dedicated print
paper for this unit. Otherwise malfunction
can occur.
• Do not fold or crease the print paper.
Otherwise malfunction can occur.