Sony DPP-MP1 Printer User Manual


 
30
GB
Folder number/file number error display
When a hyphen [-] appears in the folder number/file number display area when a
folder number or file number is selected or while printing an image with the Print
Mark, conditions indicated are corresponding remedies are as follows.
Condition Meaning and remedy
You cannot select the image for printing. Or,
there are duplicate folder numbers.
c Image cannot be printed due to a problem
with the image folder number.
You cannot select an image for printing. Or,
there are duplicate file numbers.
c Image cannot be printed due to a problem
with the image file number.
The image has a Print Mark, but it cannot be
printed using this unit.
c The image file is corrupt and cannot be
printed. When this error occurs while
printing an image that has a Print Mark,
printing is suspended. To start printing the
next image, press PRINT/STOP.
Folder number
File number
Warning Messages
Messages that may appear on the display are listed and explained in the table below.
Message Meaning
WAIT
RIBON
PAPER
Printing was stopped.
c The indication is shown while the last image is
being printed. When the image is finished, the
indication STOP is shown briefly and then goes
out.
The temperature inside the printer is too high, and
printing has been temporarily disabled.
c Wait until printing resumes automatically.
No print cartridge is inserted, or the print cartridge is
used up.
c Insert or replace the print cartridge (page 10).
No paper tray is inserted, or the print paper is used up.
c Insert a paper tray loaded with paper (page 11).