Filter
Top Products
16
Control Lock
Function
The control lock function disables all the buttons on the
front panel except the u (power) and OPTION buttons and
the INPUT switch.
1 Press the OPTION button.
The “OPTION” OSD appears.
2 Press the ¨./> button to select “LOCK.”
3 Press the >?// button to select “LOCK.”
The “OPTION” OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
Once you select “LOCK,” you cannot select other item on
the “OPTION” OSD using the ¨ ./> button.
If you press any button other than the u (power) and
OPTION buttons and the INPUT switch, the
mark
appears on the screen.
To cancel the control lock
Press the > ?// button to select “UNLOCK.”
Note
Use the control lock function only when necessary.
OPTION
OPT ION
LANGUAGE
OSD POS I T I ON :
OSD MENU
LOCK
I NPUT : BNC
JPN ENG FRA
DEU ESP I TA
RIGHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
84.4
kHz/ 72Hz
SELECT
SET
Degaussing the
Screen
The screen of the monitor is automatically degaussed when
the power is turned on (page 3).
You can degauss manually.
1 Press the SCREEN button.
The “SCREEN” OSD appears.
2 Press the ¨ ./> button to select “DEGAUSS.”
3 Press the > / button.
The screen is degaussed for about five seconds.
SCREEN
08
SCREEN
H CONVERGENCE
CANCEL MOI RE
MOI RE ADJ
LANDING
85
OFF ON
SELECT
SET / ADJUST
V CONVERGENCE
72
0
ADJUST
DEGAUSS
ON