Filter
Top Products
30
2 Click NEXT.
Settings made in the Setup of DSL (PPPoE) Connection Parameters
dialog box are displayed.
3 Make sure that you have made the correct settings, then
click NEXT.
Notes are displayed regarding the DSL Modem (PPPoE) mode; be sure
to read them carefully.
4 Click UPLOAD.
The settings are uploaded to the Access Point. Wait until the Access
Point's POWER indicator turns green.
Note
The indicators on the Access Point flash while changes to the settings are being
processed.
When the confirmation dialog box appears, click FINISH to exit.
This completes the software setup. The Wireless LAN environment is
complete.
When you change the Access Point Network Name or
Encryption Key:
After changing the Access Point Network Name or Encryption Key, you
must update the computer settings and reconnect to the Access Point. For
details on how to connect to the Access Point, see “To establish
communication with the Access Point” on page 15.
Now you can copy a file from another computer on the Wireless LAN
(page 31) or connect to the Internet (page 34).