Filter
Top Products
Troubleshooting
35
3535
35
❑
If the above steps fail to “unlock” your computer, try the following steps:
1 Save any unsaved work, if possible.
2 Press Alt+F4.
3 Select Restart.
4 Click OK.
❑
If you cannot restart as described in the preceding steps, you can restart the
computer by pressing Ctrl+Alt+Delete or by pressing the power switch for
more than six seconds.
❑
Contact the software publisher or designated provider for technical support.
See the contact information in this manual.
Topic:
Topic: Topic:
Topic: Why does Windows lock up during shutdown?
Why does Windows lock up during shutdown?Why does Windows lock up during shutdown?
Why does Windows lock up during shutdown?
The Windows
®
operating system may not shut down properly for many reasons,
including incompatible or conflicting drivers, damaged files, or non-responsive
hardware. For troubleshooting information, you can search Windows Help.
1
11
1 From the Start menu, select Help.
2
22
2 Click the Contents tab.
3
33
3 Click Troubleshooting and then click Windows 98 Troubleshooters.
4
44
4 Click the subject for which you want information, and then answer the
questions that are appropriate for your problem.
Topic:
Topic: Topic:
Topic: How do I change the parallel port type to ECP, EPP, or bi-
How do I change the parallel port type to ECP, EPP, or bi-How do I change the parallel port type to ECP, EPP, or bi-
How do I change the parallel port type to ECP, EPP, or bi-
directional?
directional?directional?
directional?
You can change the parallel port type using the System Setup utility (CMOS
Setup Utility). To access System Setup:
1
11
1 From the Start menu, select Shut Down, and then select Restart.
2
22
2 When the Sony screen displays, press the F2 key on your keyboard.
3
33
3 Select the Advanced tab from the CMOS Setup Utility screen.
✍
Pressing Ctrl+Alt+Delete twice consecutively may result in the loss of changes
made to files that are currently open.