Filter
Top Products
43
Specifications
Others
• When a signal other than the preset signals shown above is input, the picture may not be displayed
properly.
• For the Memory No.49*, the smart APA function and the APA key of the remote commander do
not active. Make adjustments for the input signal using the Adjust Signal... on the Signal menu.
• When an SXGA+ signal is input, the image may extend beyond the edges of the screen. In this
case, input a signal with no black edges around the image, and disconnect and reconnect the cable
or select the input signal by pressing the INPUT key.
Warning on power connection
Use the supplied power cord when you use the projector in your country/region. Otherwise, use
a proper power cord meeting the following specifications.
41 1152 × 864 SXGA VESA 70 Hz 63.995 70.019 H-pos, V-pos 1472
42 SXGA VESA 75 Hz 67.500 75.000 H-pos, V-pos 1600
43 SXGA VESA 85 Hz 77.487 85.057 H-pos, V-pos 1568
44 1152 × 900 Sunmicro LO 61.795 65.960 H-neg, V-neg 1504
45 1280 × 960 SXGA VESA 60 Hz 60.000 60.000 H-pos, V-pos 1800
46 SXGA VESA 75 Hz 75.000 75.000 H-pos, V-pos 1728
47 1280 × 1024 SXGA VESA 60 Hz 63.974 60.013 H-pos, V-pos 1696
48 SXGA VESA 75 Hz 79.976 75.025 H-pos, V-pos 1688
49* SXGA VESA 85 Hz 91.146 85.024 H-pos, V-pos 1476
50 1400 × 1050 SXGA+ 60 Hz 63.981 60.020 H-neg, V-neg 1688
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync SIZE
Notes
The United
States,
Canada
Continental
Europe,
Korea
UK Australia Japan
Plug type YP-11 YP-21 SP-61 B8 YP-13
Female end YC-13L YC-13L YC-13L C7-2 YC-13L
Cord type SPT-2 H03VVH2-F H03VVH2-F H03VVH2-F VCTFK
Rated Voltage &
Current
10A/125V 2.5A/250V 2.5A/250V 2.5A/250V 7A/125V
Safety approval UL/CSA VDE BS SAA DENAN
Cord length (max.) 4.5 m – – – –