Filter
Top Products
♦♦♦
12
English
Energy Declaration
This monitor is equipped with a function for saving energy which supports
the VESA Display Power Management Signaling (DPMS) standard. This means
that the monitor must be connected to a computer which also supports the
VESA DPMS standard to fulfill the requirements of the NUTEK specification
803299/94/96. The time settings for switching to a power saving mode are
adjusted from the system unit by software. From the first indication of inac-
tivity to power saving position A2 the total time must not be set to more than
70 minutes.
1. VESA Power-Management Proposal
2. Power Consumption (120/230 Vac)
According to TCO guidelines, the optimum TCO readings are measured when
brightness and contrast are adjusted to their center position.
Compatibility
This color monitor supports multiple operating platforms such as IBM
compatible and Macintosh family computers. This section provides you with
detailed information on pin assignment of the D-Sub connector and the
preset timing chart of the prevailing video standards.
Pin Assignment
5
10
15
11
6
1
Male Mini D-15 Connector
TECHNICAL INFORMATION
Signal 15 Pin Mini D-Sub
Red Video 1
Green Video 2
Blue Video 3
Horizontal Sync 13
Vertical Sync 14
Ground 4,5,6,7,8,10,11
No Connection 9
SDA (DDC) 12
SCL (DDC) 15
NUTEK VESA state LED indicator
Power
Consumption
No rmal
operation
On Green <110W
Power Saving
Position A1
Suspend Amber <15W
Power Saving
Position A2
Off Amber <8W
VESA DPMS Standard
H. sync V. sync Video State
Off On Blank Stand-by
On Off Blank Suspend
Off Off Blank Off
CONTROLS AND ADJUSTMENTS