Filter
Top Products
28 (EN)
COLOR TEMP (Temperature)
Selects the appropriate color temperature according to
your application and the input source signal.
CLAMP
Corrects the luminance of the input picture.
CLAMP is used as a standard for setting the black
level of a picture correctly. The standard position of
the clamp depends on the kind of sync signal being
used. Normally, the projector CPU judges the signal
and sets the position automatically. However, the CPU
can misjudge the signal because of noise. If the
luminance of the picture seems to be incorrect, the
clamp position may need to be changed.
AUTO: Automatic setting mode. Normally set to this
position.
SonG: Set to this position if the black seems too light
or greenish.
H/C: Set to this position if the picture is too dark or
luminance is unstable.
HP: If the luminance is still incorrect after changing
to the SonG or H/C position, set to this position
and perform the H-SHIFT adjustment.
TRI-LEVEL/S: Set to this position if the picture is
dark when using the tri-level sync.
Note
If the luminance is still incorrect after changing the clamp
setting, check the input signal and the connections.
The INPUT SETTING menu is used to adjust the
input signal.
Items that can be adjusted are displayed in green.
You cannot select the items indicated in white.
Page 1
Page 2
INPUT-A
COLOR TEMP:6500
CLAMP:AUTO
V SHIFT:WIDE
SYNC SEL:AUTO
COMPONENT FORMAT:
SMPTE/EBU-N10
SYNC OSC:1
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
INPUT
SELECT
PIC/AU
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
COLOR TEMP 9300
CLAMP:AUTO 6500
V SHIFT:WI 5400
SYNC SEL:A 3200
COMPONENT PRESET
SMPTE
SYNC OSC:1
The INPUT SETTING Menu
INPUT-A
RGB SIZE
RGB SHIFT
BLKG
INPUT
SELECT
PIC
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
INPUT
SELECT
PIC/AU
CTRL
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER
EXIT: MENU
INPUT-A
COLOR
CLAMP AUTO
V SHI SonG
SYNC H/C
COMPO HP
TRI-LEVEL S
SYNC