Filter
Top Products
3
VPL-EW130
2. Common Commands
2-1. Sub Commands
Sub Command is the value which is used by Simplifi ed Command. Value is assigned for executing func-
tion. For example, if you want to change the picture mode, the appropriate value assigned for the desired
picture mode should be chosen.
2-1-1. ITEM List
Item lists are described below. Tables are shown per function category.
ITEM List For Picture
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Byte
PICTURE MODE 00h 02h DYNAMIC 0000h Set/Get
STANDARD 0001h
PRESENTATION 0002h
GAME 0003h
LIVING 0004h
CINEMA 0005h
CONTRAST 00h 10h VALUE 0000h-0064h(0-100)
BRIGHTNESS 00h 11h VALUE 0000h-0064h(0-100)
COLOR 00h 12h VALUE 0000h-0064h(0-100)
HUE 00h 13h VALUE 0000h-0064h(0-100)
SHARPNESS 00h 14h VALUE 0000h-0064h(0-100)
VOLUME 00h 16h VALUE 0000h-0064h(0-100)
COLOR TEMP 00h 17h HIGH 0000h
MID 0001h
LOW 0002h
DDE 00h 18h OFF 0000h
PROGRESSIVE 0001h
FILM 0002h