Filter
Top Products
4
VPL-EW130
ITEM List For Screen
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Byte
ASPECT 00h 20h FULL 0000h Set/Get
NORMAL 0001h
ZOOM 0003h
FULL1 0007h
FULL2 0008h
FULL3 000Ch
WIDE ZOOM 0002h
4 : 3 0009h
16 : 9 000Ah
ITEM List For Setup
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Byte
INPUT TERMINAL 00h 01h VIDEO 0000h Set/Get
S-VIDEO 0001h
INPUTA 0002h
INPUTB 0003h
PICTURE MUTING 00h 30h OFF 0000h
ON 0001h
AUDIO MUTING 00h 31h OFF 0000h
ON 0001h
INPUT A SIGNAL-SEL 00h 32h AUTO 0000h
COMPUTER 0001h
COMPONENT 0002h
VIDEOGBR 0003h
LAMP MODE 00h 40h HIGH 0000h
STANDARD 0001h
LOW 0002h
ITEM List For Infrared Remote Command
<Table 1> <Table 2> Remarks
Item Number Data
Item Upper byte Lower byte Data Upper byte Lower byte
Infrared Remote Command
(15 bit category)
17h Refer to Section
2-1-2.
*1
_
00h 00h Set only
Infrared Remote Command
(20 bit E category)
19h
_
00h 00h
Infrared Remote Command
(20 bit EE category)
1Bh
_
00h 00h
*1: For using this item number, the simulation of the infrared remote controller is enable. Select the corresponding code in the table of
Section 2-1-2 and use it as the lower byte of the item number.
n
Other value (the upper byte) is assigned depending for category.