Filter
Top Products
12
Location and Function of Controls
– Flashes in red when the internal
temperature is high or the electrical
system has failed.
– Lights in green when the projector is
turned on, and when it is ready to
operate.
– Flashes in green from the time when
the projector is turned on until the
projector is ready to operate. Also,
flashes in green while the cooling fan
is running after the power is turned off
with the ?/1 key. The fan runs for
about 90 seconds after the power is
turned off.
– Lights in orange when the power
saving mode is on.
For details, see “Turning Off the Power”
on page 22 and “Indicators” on
page 47.
c SHIFT key
Enters the H/V shift adjustment mode.
Next, adjust the vertical/horizontal
position of the picture using the arrow
keys. Press the v key to move the picture
upward. Press the V key to move it
downward. Press the b key to move it
leftward. Press the B key to move it
rightward.
When the optional accessory VPLL-
1008 is attached to the projector, do not
perform a lens-shift operation after
installation, because the projector is
installed to align the center point of the
screen with that of the lens by a dealer.
Otherwise, edges of the picture may be
cropped.
d ZOOM key
Enters the zoom adjustment mode. Next,
adjust the picture size using the arrow
keys. Press the v or B key to enlarge the
picture size, and the V or b key to
reduce it.
e FOCUS key
Enters the focus adjustment mode. Next,
adjust the focus using the arrow keys.
Press the v or B key to focus on a
picture further back, and the V or b key
to focus on a picture further forward.
The ZOOM and FOCUS keys cannot be
used when you attach the optional lens
VPLL-1008 to the projector.
f MENU key
Displays the on-screen menu. Press
again to clear the menu.
g ?/1 (On/Standby) key
Turns on the projector when it is in
standby mode. When you push this key,
the ON/STANDBY indicator flashes in
green and then lights in green when the
projector is ready to operate.
To turn off the power, press the ?/1 key
twice according to the message or hold
the ?/1 key for about one second.
h INPUT key
Select the input signal. Each time you
press the key the input signal switches.
i ENTER/v/V/b/B (Arrow) keys
Used to enter the settings of items in the
menu system, select a menu, or make
various adjustments.
a VIDEO IN (Video input)
Connects to external video equipment .
S VIDEO (mini DIN 4-pin)
Connects to the S video output (Y/C
video output) of video equipment.
VIDEO (phono type)
Connects to the composite video output
of video equipment.
Note
Connector Panel
1
4567 098
23