Sony VPL-FW41/FW41L Projector User Manual


 
50
Specifications
1)
Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB 50/60 Hz, Progressive
component 50/60 Hz, DTV
(480/60i, 575/50i, 480/60p,
575/50p, 720/60p, 720/50p,
1080/60i, 1080/50i, 1080/60p,
1080/50p), Composite video, Y/
C video
Speaker Stereo speaker system, 40 × 70
mm (1
5
/8 × 2
7
/8 inches)
Speaker output
1.8 W × 2
Input/Output
VIDEO IN VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p ±2 dB (PAL)
(75 ohms terminated)
AUDIO: phono type × 2
rated input 500 mVrms, input
impedance more than 47
kilohms
INPUTA/B Analog RGB: HD D-sub 15-pin
(female)
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level, high impedance, positive/
negative
VD: Vertical sync input: TTL
level, high impedance, positive/
negative
AUDIO: Stereo minijack, rated
input 500 mVrms, input
impedance more than 47
kilohms
INPUT C Analog RGB/component: 5BNC
(female)
R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
(Except computer signals)
B/B-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
HD:
Horizontal sync input: TTL
level, high impedance, positive/
negative
VD:
Vertical sync input: TTL level,
high impedance, positive/
negative
AUDIO: Stereo minijack
rated input 500 mVrms, input
impedance more than 47
kilohms
INPUT D Digital RGB/Y C
B (PB) CR (PR):
HDMI
INPUT E NETWORK
RJ-45: 10BASE-T/100BASE-
TX
OUTPUT MONITOR OUT: HD D-sub 15-
pin (female)
R, G, B: Gain Unity: 75 ohms
HD, VD: 4 Vp-p (open), 1 Vp-p
(75 ohms)
AUDIO OUT (variable out):
Stereo minijack
1 Vrms (When the volume is
maximum and an input signal is
500 mVrms), output impedance
5 kilohms
REMOTE RS-232C: D-sub 9 pin
CONTROL S IN/PLUG IN POWER
Stereo minijack
General
Dimensions 532 × 145 × 352 mm (21 × 5
3
/
4
×
13
7
/
8
inches) (w/h/d) (without
the projection parts)
Mass Approx. 9.8 kg (21 lb 10 oz) (VPL-
FE40/FX40/FX41/FW41)
Approx. 9.0 kg (19 lb 13 oz) (VPL-
FE40L/FX40L/FX41L/
FW41L)
Power requirements
AC 100 to 240 V, 4.1 - 1.7 A,
50/60 Hz
Power consumption
Max. 400 W
(in standby (standard): 15 W, in
standby (low): 0.5 W)