Filter
Top Products
37
Projecting
Use the optional TDG-PJ1 3D glasses* to view 3D images.
Connect the optional TMR-PJ1 3D Sync Transmitter* to the projector before using the 3D glasses.
(1 page 31)
* 3D Sync Transmitter and 3D glasses are supplied with VPL-HW30AES.
1 Put on the 3D glasses.
2 Press the power button on the 3D
glasses.
The LED indicator lights up in green.
3 Place the 3D Sync Transmitter in view
of the 3D glasses.
For detailed information, refer to the
instruction manual supplied with the 3D
glasses.
Precautions for use
• The 3D glasses are operated by receiving infrared signals from the 3D Sync Transmitter.
Mis-operation may occur if:
– The 3D Sync Transmitter is not facing the 3D glasses IR (infrared) sensor, or the distance
between the 3D Sync Transmitter and 3D glasses is too great.
– If there are objects blocking the path between the 3D glasses and the 3D Sync
Transmitter.
– The 3D glasses are near other infrared devices (remotely-controlled lights, air
conditioners, IR transmitter).
• There are differences in perception of 3D video images among individuals.
• When the temperature of the usage environment is low, the 3D effect may be diminished.
• Be careful not to pinch your fingers in hinges of the 3D glasses when bending the temple
frames.
• Do not drop or modify these 3D glasses.
• If these glasses are broken, keep broken pieces away from your mouth or eyes.
• Not for use by children without proper adult supervision.
Using the 3D Glasses
Note
LED indicatorPower button
IR sensor