Filter
Top Products
Using the Menus
57
GB
HDMI Setting
To enable this function, set “Standby Mode” (1 page 53) in the
Setup menu to “Standard”, and then set “PJ Auto Power On” to
“On”. For details, see “About the Control for HDMI” (1 page 63).
Device List: Lists all the Control for HDMI compatible equipment
connected to the projector.
When “Enable” is selected, the Control for HDMI setting of Sony
equipment (AV amplifier, video, etc.), which is compatible with
“Control for HDMI - Easy Setting”, will also be effective.
*“Control for HDMI - Easy Setting” is a function that makes the
Control for HDMI setting of equipment connected to HDMI input
of the projector effective as well when the Control for HDMI
setting of the projector is effective. This function is only available
between compatible Sony equipment, and some equipment may
not be compatible.
Although some non-Sony equipment may be compatible,
operation is not guaranteed for such equipment.
HDMI Dynamic Range Set the video input level of HDMI 1 and HDMI 2 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals of 16-235.
Full: The video input level is set for signals of 0-255.
If the video output setting of the connected HDMI device is not set
correctly, light and dark parts of the video may appear too light or
too dark.
Auto Input Search Hides input terminals that do not have signal input.
When set to “On”, terminals without input signals do not appear on
the input palette that appears when you press INPUT.
To display all input terminals, set this to “Off”. (1 page 27)
Background Selects the background color of the screen when no signal is input.
You can select “Black” or “Blue”.
Settings Lock Locks menu item settings to prevent operational error. (1 page 58)
Off: Cancels the Settings Lock.
Level A: Clears the display of 20 items from the menu.
Level B: In addition to Level A, clears the display of a further 15
items.
Note
Note