Filter
Top Products
25
Other Functions
Convenient Functions
2 Enter the password.
Enter the password that was set.
If you call the customer service center because
you have forgotten the password, you will need
to be able to verify the projector’s serial
number and your identity. (This process may
differ in other countries/regions.) Once your
identity has been confirmed, we will provide
you with the password.
Other Functions
If you will be using a circuit breaker to turn
the power for the entire system on and off,
set the direct power on function to “On.” You
can turn the power on/off without pressing
the power key on the projector.
If you are leaving the conference room
immediately, turn the projector off, and then,
you can unplug the AC power cord.
When you restart the power immediately after
turning it off using the Off & Go function, the
power may not come back on. In that case, wait
a few minutes and turn on the power again.
To enlarge the image (Digital Zoom
function)
You can select a section of the image to
enlarge. This function works when a signal
from a computer is input.
This function does not work when a video
signal is input.
1 Project a normal image, and press the
D ZOOM + key on the Remote
Commander.
The digital zoom icon appears in the
center of the image.
Note
Direct Power On/Off Function
Off & Go Function
Note
Effective Tools for Your
Presentation
Digital zoom icon