Filter
Top Products
32
The INPUT SETTING Menu
• For Aspect, some of the “Aspect” setting items are not displayed on the screen according to the
input signal.
• Note that if the projector is used for profit or for public viewing, modifying the original picture by
switching to the wide mode may constitute an infringement of the rights of authors or producers,
which are legally protected.
This projector has 45 types of preset data for
input signals (the preset memory). When a
preset signal is input, the projector
automatically detects the signal type and
recalls the data for the signal from the preset
memory to adjust it to an optimum picture.
The memory number and signal type of that
signal are displayed on the INFORMATION
menu (See page 38). You can also adjust the
preset data through the INPUT SETTING
menu.
See the chart on page 50 to find if the signal
is registered in the preset memory.
When the aspect ratio of input signal is other
than “Full 2”, a part of the screen may be
displayed in black.
Aspect (When the
PC signal is input)
You can set the aspect ratio of the picture to be
displayed for the current input signal. This item is
enabled only when an PC signal (preset memory
numbers 21 to 63) is input.
• Full 1: Displays a picture vertically or horizontally to
fill the screen without changing the aspect ratio of the
original picture.
• Full 2: The original image is projected fully in the
window.
• Normal: Displays the picture while matching one
pixel of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
Set according to
the input signal
Notes
About the Preset Memory No.
Setting items Functions Initial setting
Note