Filter
Top Products
Source Technologies, LLC ST9630 Secure MICR Printer User’s Guide
58
flash memory. Here we call it and print it with an
exclamation point (!).
&%1B(3@ PCL command to return to the default font.
&%1B$&f0S PCL command to push (store) the current cursor
position.
&%1B$*p296x3184Y PCL command to move the cursor to 296X, 3184Y. At
300 dpi, this is .97 inches across and 10.61 inches
down. We are precisely positioning the MICR line.
&%SMD...$ Print E-13B MICR command. Prints the MICR line and
stores the MICR line information in the second position
in the Audit Report.
&%1B$&f1S PCL command to pop (return) the cursor to the pushed
position.
&%SQ710:33:45 AM$ Here we send the time of print to the printer. The data
is recorded in the Audit Report but this field is not
printed on the page.
&%STORE$ Signals the end of a check and the end of Audit Report
recording.
&%??!! Turns Hex Transfer off.
Audit Trail Reports | 8