Filter
Top Products
Hardware Setup SY-5EMA
11
Note: For Dual voltage CPUs, JP4 must be set to enable.
And at the same time make sure that the voltage setting of
JP30 is correct. Incorrect setting may damage CPU.
Those processors may come in various voltages on different
markets. Therefore, always make sure you know the type of the
CPU you are installing and adjust the settings on JP30 accordingly.
This motherboard supports CPU voltages from 2.0 to 3.52V in 0.1V
increments. Use the following tables to set the CPU voltage jumpers
JP30 to match the voltage value of your CPU:
CPU Voltage Setting: JP30
Voltage Value 1-2 3-4 5-6 7-8 9-10 11-12
3.5V* close open open open open close
3.3V close open open open close open
3.2V close open open close open open
3.1V close close close open open open
3.0V close close open open open open
2.9V close open close open open open
2.8V close open open open open close
2.7V open close close close open open
2.6V open close open close open open
2.5V open open close close open open
2.4V open open open close close open
2.3V open close close open open open
2.2V open close open open close open
2.1V open open close open close open
2.0V open open open open open open