Filter
Top Products
BIOS Setup Utility SY-5EMA
49
3-4.1 Power Management Controls
Power
Management
Controls
Setting Description Note
Disabled Default
ACPI
function
Enabled Enabled if you use Windows
98 and want to use ACPI
User Define Lets you define the HDD and
system power down times.
Doze timer Standby timer Suspend timer
Min Saving 40 Min 40 Min 40 Min
Power
Management
Max Saving 20 Sec 20 Sec 20 Sec
Yes To use Advanced Power
Management (APM) you
must run [power.exe] under
DOS V6.0 or later version.
Default
PM Control
by APM
No
Suspend
->Off
The monitor will be switched
off in suspend mode,
Default
All Modes
->Off
Video Off
Option
Always On
the monitor will be switched
off in all power saving
modes
V/H
SYNC+Blank
Default
Blank screen
Video Off
Method
DPMS
Supported
Selects the method by which
the monitor is blanked.
3 Default
Modem Use
IRQ
3-11, NA
Assigns an IRQ# to the
modem device.
Instant - Off Default
Soft-Off by
PWRBTN
Delay 4 Sec
Select the Power Button
Mode.
Instant – Off : One push off.
Delay 4 Sec : Push for 4s to
switch off.