Filter
Top Products
SY-5SSM
Quick Start Guide
11
Hardware
Installation
Step 7. Enable/Disable the Onboard Sound (JP9)
The onboard audio features of your Motherboard are controlled by jumpers JP9
Choose the available sound options among the following table:
Sound Settings JP9
Onboard Sound: Enable short
Onboard Sound: Disable open
Step 8. Clear CMOS Data (JP5)
Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5, and then by
shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white
colored cap.
CMOS Clearing Clear CMOS Data Retain CMOS Data
JP5 Setting
Short pin 2-3 for a
few seconds to
clear the CMOS
Short pin 1-2
to retain new
settings
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
3
2
1
3
2
1