Filter
Top Products
SY-5SSM
Quick Start Guide
5
Hardware
Installation
2
2
Installation
To avoid damage to your Motherboard, follow these simple rules while handling
this equipment:
l
Before handling the Motherboard, ground yourself by grasping an unpainted
portion of the system's metal chassis.
l
Remove the Motherboard from its anti-static packaging. Hold it by the edges and
avoid touching its components.
l
Check the Motherboard for damage. If any chip appears loose, press carefully to
seat it firmly in its socket.
Follow the directions in this section designed to guide you through a quick and correct
installation of your new
SY-5SSM
Motherboard. For detailed information, please refer to
SY-5SSM Motherboard User's guide and Technical Reference online manual included on
the CD-ROM packed with your Motherboard.
PREPARATIONS
Gather and prepare all the necessary hardware equipment to complete the installation
successfully:
u
Pentium
®
processor with cooling fan
u
DIMM memory module
u
Computer case and chassis with adequate power supply unit
u
Monitor
u
Keyboard
u
Pointing Device (PS/2 mouse)
u
Speaker(s) (optional)
u
Disk Drives: HDD, CD-ROM, Floppy drive…
u
External Peripherals: Printer, Plotter, and Modem- (optional)
u
Internal Peripherals: Modem and LAN cards (optional)
Notice 1:
This Motherboard features one built-in VGA port and three built-in audio-stereo
ports. Therefore you do not need to install neither a VGA card nor a sound card.
Notice 2:
When using the onboard VGA, please install DRAM modules in bank "DIMM 1"
in priority.
Notice 3:
If you want to use an external speaker connected to "Line-out" port, make sure
to use an "amplified speaker" that can generate proper output sound volume.