Filter
Top Products
SY-6KE Quick Start Guide
6
Hardware
Installation
Install the Mainboard
Follow the steps below in order to perform the installation of your new
SY-6KE
Mainboard.
Step 1. Install the CPU
Mark your CPU Frequency:
Record the working frequency of your CPU
that should be clearly marked on the CPU cover.
233MHz (66 x 3.5) 300MHz (66 x 4.5) 366MHz (66 x 5.5)
266MHz (66 x 4.0) 333MHz (66 x 5.0)
CPU Mount Procedure:
To mount the Pentium
®
II processor that you have
purchased separately, follow these instructions.
1
Unpack the Retention Kit 2
Position the Mainboard 3
Insert the Screws
4
Install the Supporting Base
5
Install the Retention Clip 6
Install the CPU
7
Install the Support Clip 8
Insert the Latches 9
Remember to connect the
CPU Cooling Fan to the
CPUFAN power connector on
the mainboard.
Supporting Base
Support Clip
Screws (x2)
Retention Clip
Latches (x2)
ATX Power
Heat Sink
Slot 1
CPUFAN Power
Larger Pinhole