Filter
Top Products
SY-7VMA-B
Quick Start Guide
17
SOYO Wizard
on Hand
Utility
Ø Step
This sets the value (in Mhz) to increment when using “Auto determine max. frequency of
the system”, the value of 1 is 0.4 MHz, so if you have set the step to to 3, the system will
increment 1.2 MHz at a time.
Ø Direct Jump
If enabled, the system will increment 4 MHz at a time.
Ø Unit
¡X FSB
Overclocking the system by changing the FSB frequency, these are for users who have
some knowledge in overclocking.
¡X CPU
Overclocking the system by directly changing the CPU frequency to the desired speed.
This is for users who are not familiar with the ratio of the CPU.
Ø Test
# of testing
set the number of time the utility will test the system after overclocking. This setting is only
valid when using “Auto determine max. frequency of the system”
# of globe
set the number of display windows while the utility is testing the overclocked system. This
setting is only valid when using “Auto determine max. frequency of the system”
Ø Startup
Load the saved overclocked FSB setting on the system during startup.