Filter
Top Products
BIOS Setup Utility
SY-K7VTA PRO
65
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
The following table describes each field in the Advanced Chipset Features
Menu and how to configure each parameter.
3-4.1 CHIPSET FEATURES SETUP
CHIPSET
FEATURES
Setting Description Note
Disabled
DRAM
Timing By
SPD
Enabled
If enable the DRAM will auto
detect the DRAM timing
Default
100MHz Default
DRAM Clock
133MHz
This item allows you to control the
DRAM speed.
SDRAM Cycle
Length
3
2
When synchronous DRAM is
installed, the number of clock
cycles of CAS latency depends on
the DRAM timing. Do not reset
this field from the default value
specified by the system designer.
Default
Disabled Default
Bank
Interleave
2 Bank
4 Bank
Increase DRAM performance.
Disabled Default
Memory Hole
Enabled Some interface cards will map
their ROM address to this area. If
this occurs, select [Enabled] in this
field.
Disabled
PCI master
Pipeline Req
Enabled
Disabled/Enabled PCI Master
Pipeline Req.
Default
Disabled
P2C/C2P
Concurrency
Enabled
This item allows you to
enable/disable the PCI to CPU,
CPU to PCI concurrency.
Default