Filter
Top Products
60 Spectra 12000 User Guide
GBIC Ports Tap GBIC Ports to configure the GBIC ports. The Configure GBIC
Ports window appears (Figure 6-5).
This determines which drives and libraries are available from each GBIC.
Side A includes Library 1 and you can assign any or all of the four
available drives by checking them. Side B includes Library 2 and you can
assign any drives you have not assigned to Side A by checking them. Or,
for redundancy and failover, you can check both sides to see all drives.
If multiple hosts are configured to access an overlapping set of drives,
access to those drives must be restricted/managed through the backup
software.
Figure 6-5 Controller GBIC Ports window.