Filter
Top Products
3
Software & Hardware Installation (PC)
1) Power down the computer and remove the power lead.
2) Remove the cover(s) to gain access to the PCIe sockets.
3) Locate a free PCIe socket and ensure that the rear panel
blanking plate is removed.
4) Plug your Duende PCIe card into the PCIe socket and
secure the mounting bracket to the computer case
5) Re-fit the cover(s) to the computer and re-connect the
power lead.
6) Switch the computer on. The Add New Hardware
Wizard should appear. Ignore this; DO NOT press
‘Next’ and DO NOT press ‘Cancel’.
7) Insert the Duende Installation CD in your CD/DVD
drive.
8) Double click the CD icon to view the CD content. If
Autorun is enabled this will happen automatically.
9) Double click the SSL Duende Setup icon.
10) Follow the on-screen instructions, making sure to attend
to the Add Hardware Wizard when prompted.
Software & Hardware Installation (Mac)
1) Power down the computer and remove the power lead.
2) Remove the cover(s) to gain access to the PCIe sockets.
3) Locate a free PCIe socket and ensure that the rear panel
blanking plate is removed.
4) Plug your Duende PCIe card into the PCIe socket and
secure the mounting bracket to the computer case.
5) Re-fit the cover(s) to the computer and re-connect the
power lead.
6) Switch the computer on.
7) Insert the Duende installation CD in your CD/DVD
drive.
8) Double click the CD icon to view the CD content.
9) Launch the Duende Installer by double clicking the
Duende Installer icon.
10) Follow the on-screen instructions.
3. Installation
Please note that this document is intended to be
read alongside the ‘Installation Guide’ provided
with Duende PCIe, alternatively you can
download a copy from:
www.solid-state-logic.com/duende