Filter
Top Products
Hi-Speed USB 2.0 to 10/100 Ethernet Controller
Datasheet
SMSC LAN9500/LAN9500i 13 Revision 1.7 (10-02-08)
DATASHEET
Note 2.2 Configuration strap values are latched on power-on reset and system reset. Configuration
straps are identified by an underlined symbol name. Signals that function as configuration
straps must be augmented with an external resistor when connected to a load.
Table 2.2 EEPROM Pins
NUM PINS NAME SYMBOL
BUFFER
TYPE DESCRIPTION
1
EEPROM
Data In
EEDI IS
(PD)
EEPROM Data In: This pin is driven by the
EEDO output of the external EEPROM.
1
EEPROM
Data Out
EEDO O8
(PU)
EEPROM Data Out: This pin drives the EEDI
input of the external EEPROM.
Auto-MDIX
Enable
Configuration
Strap
AUTOMDIX_EN
IS
(PU)
Auto-MDIX Enable Configuration Strap:
Determines the default Auto-MDIX setting.
0 = Auto-MDIX is disabled.
1 = Auto-MDIX is enabled.
See Note 2.2 for more information on
configuration straps.
1
EEPROM
Chip Select
EECS O8 EEPROM chip select: This pin drives the chip
select output of the external EEPROM.
1
EEPROM
Clock
EECLK O8
(PD)
EEPROM Clock: This pin drives the EEPROM
clock of the external EEPROM.
Power Select
Configuration
Strap
PWR_SEL
IS
(PD)
Power Select Configuration Strap: Determines
the default power setting when no EEPROM is
present.
0 = The LAN9500/LAN9500i is bus powered.
1 = The LAN9500/LAN9500i is self powered.
See Note 2.2 for more information on
configuration straps.
Table 2.3 JTAG Pins
NUM PINS NAME SYMBOL
BUFFER
TYPE DESCRIPTION
1
JTAG Test
Port Reset
(Internal PHY
Mode)
nTRST IS
(PU)
JTAG Test Port Reset (Active-Low): In internal
PHY mode, this pin functions as the JTAG test
port reset input.
Receive Data
0
(External
PHY Mode)
RXD0 IS
(PD)
Receive Data 0: In external PHY mode, this pin
functions as the receive data 0 input from the
external PHY.
1
JTAG Test
Data Out
(Internal PHY
Mode)
TDO O8 JTAG Data Output: In internal PHY mode, this
pin functions as the JTAG data output.
PHY Reset
(External
PHY Mode)
nPHY_RST O8 PHY Reset (Active-Low): In external PHY
mode, this pin functions as the PHY reset output.