Filter
Top Products
ORDER NUMBERS:
Note: USB251xB/USB251xBi products have not yet been released. They
are featured in this datasheet as a preliminary product preview.
ORDER NUMBERS
LEAD-FREE
ROHS COMPLIANT
PACKAGE PACKAGE SIZE
TEMPERATURE
RANGE
USB2512-AEZG
USB2512A-AEZG
USB2512B-AEZG
USB2513-AEZG
USB2513B-AEZG
USB2514-AEZG
USB2514B-AEZG
36QFN 6 x 6 x 0.5 mm 0ºC to 70ºC
USB2512i-AEZG
USB2512Ai-AEZG
USB2512Bi-AEZG
USB2513i-AEZG
USB2513Bi-AEZG
USB2514i-AEZG
USB2514Bi-AEZG
36QFN 6 x 6 x 0.5 mm -40ºC to 85ºC
USB2513-HZH
USB2514-HZH
48QFN 7 x 7 x 0.5 mm 0ºC to 70ºC
USB2517-JZX
64QFN 9 x 9 x 0.5 mm 0ºC to 70ºC
USB2517i-JZX
64QFN 9 x 9 x 0.5 mm -40ºC to 85ºC
USB 2.0 Hi-Speed Hub Controller
Datasheet
Revision 1.0 (3-11-09) 2 SMSC USB251x
DATASHEET
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123
Copyright © 2009 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.