Filter
Top Products
ON, OFF,OFF,OFF :8.0 inch OFF,OFF,OFF,OFF :11.0 inch
36 Using the EDS Mode
Switch 5: Top Margin
Selects 1/6-inch (ON) or 1-inch (OFF) spacing as the top margin when execute
Paper auto-loading feature.
Switches 6,7: Not Used
BANK C
Switch 1: CR Centering at top of page
Specifies whether the printer execute CR Centering at the top of page (ON) or not (OFF).
When the printer execute CR Centering, the paper is fed smoothly.
Switch 2: CR Centering at seem line (Tractor mode only)
Specifies whether the printer execute CR Centering at seem line (OFF) or not (ON).
The thick paper is fed smoothly at the perforation when select this feature.
Switch 3: CR Centering Position
Specifies whether the printer's CR centering is long (ON) or short (OFF). When
the CR centering position is long (ON), the carriage moves to the center of the
platen before the paper is inserted or ejected. When CR centering is short (OFF),
the carriage moves to the left side of the platen.
In order to prevent paper feeding problems, set the CR centering position to
short (OFF) when narrow (less than 6″) paper is used and set it to long (ON)
when wider (more than 6″) paper is used.
Switch 4: Paper Out Detector
Specifies whether the printer’s paper out detector is enabled (ON) or disabled
(OFF). When the paper out detector is enabled (ON), the printer automatically
stops printing whenever it senses there is no more paper. When it is disabled
(OFF), the printer continues printing as long as there is data. Selecting disabled
(OFF) makes it possible to print right up to the bottom of a page, but it also
creates the danger of printing when there is no paper loaded in the printer, which
can damage the print head and platen.